On Thu, 12 Apr 2001 ernte23@gmx.de wrote:
> hi,
>
> when trying to scan with xsane and "agfa snapscan 1236s", i get the
> following message:
>
> Attached scsi generic sg2 at scsi0, channel 0, id 5, lun 0, type 6
> sym53c895-0-<5,*>: target did not report SYNC.
This message is just a warning. If your scanner does not support
synchronous data transfers, then it is ok. You may want to check the doc
of the device on this point.
> sym53c895-0-<5,0>: extraneous data discarded.
> sym53c895-0-<5,0>: COMMAND FAILED (89 0) @cff3d000.
This is the way the driver signals data overrun. Btw, I never used xsane.
If this tool has some trace mode that tells what SCSI commands are sent to
the device, this would help to get such traces.
> what can i do about this?
At least, try to catch the SCSI commands that are sent to the device, and
report them.
Gérard.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Apr 15 2001 - 21:00:19 EST