I've recently installed a SDT-9000 tape drive. Running kernel 2.4.x I've
noticed the following (critical) problem:
Apparently the data are corrupted on the way to (from?) tape. I'm sure the
DAT
drive is good (worked good on NT, head clean, new cartridge). It doesn't
report
data errors. I've got bad CRC errors on tar (the gzip part, of course)
The drive is on an Adaptec 2904 controller, with a Yamaha CDRW on the same
bus.
I'm pretty sure it's terminated correctly. Another SCSI controller (2940)
is
driving 2 hard drives. Underlying HW: Athlon 1GHz, on Asus board (VIA
chipset).
It seems to happen frequently (tried four times with about 600MB of data,
three
times failed the restore :((. Tried all the 2.4.x kernel series (thru
2.4.3)
What can it be? (I'll try to compare the read data with the original...)
-- Lorenzo Marcantonio
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Apr 15 2001 - 21:00:15 EST