On Tue, Mar 20, 2001 at 11:21:10PM -0500, Jeff Garzik wrote:
> The current Via-specific parport_pc.c code forces on the best possible
> parallel port modes the chip can handle. In retrospect, what it should
> be doing is reading the configuration BIOS has set up, and not touching
> it.
Yes, I think you are right.
> I am not sure that I agree, however, that an "irq=none" on the kernel
> cmd line should affect the operation of the Via code. I would much
> rather fix the Via code as I suggest above.
irq=none should definitely be honoured, or else the user has to reboot
in order to debug problems with printing. The user's io=, irq= and
dma= settings should always be honoured. IMHO.
When irq=auto, the BIOS settings should be used.
Case in point: until very recently there was a bad problem in the
irq-driven printing path. But only people with Via chipsets were
reporting it, and it didn't go away with 'irq=none' (which parport.txt
says to do in order to trouble-shoot). It makes Via chipsets the
exception, and it's confusing IMHO (it confused me, anyhow).
Tim.
*/
This archive was generated by hypermail 2b29 : Fri Mar 23 2001 - 21:00:15 EST