LILO Loading linux.............. Linux version 2.4.2-ac5 (root@omega) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #2 SMP Tue Feb 27 01:20:24 PST 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (usable) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000000001000 @ 00000000fec00000 (reserved) BIOS-e820: 0000000000001000 @ 00000000fee00000 (reserved) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) BIOS-e820: 0000000037f00000 @ 0000000000100000 (usable) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at 000f5810 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 229376 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. Bootup CPU Processor #1 Pentium(tm) Pro APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. Bus #0 is PCI Bus #1 is PCI Bus #2 is ISA I/O APIC #2 Version 17 at 0xFEC00000. Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 2, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 2, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 0, trig 0, bus 2, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f Int: type 0, pol 3, trig 3, bus 0, IRQ 20, APIC ID 2, APIC INT 11 Int: type 0, pol 3, trig 3, bus 0, IRQ 28, APIC ID 2, APIC INT 12 Int: type 0, pol 3, trig 3, bus 0, IRQ 3c, APIC ID 2, APIC INT 13 Int: type 2, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 17 Lint: type 3, pol 1, trig 1, bus 0, IRQ 00, APIC ID ff, APIC LINT 00 Lint: type 1, pol 1, trig 1, bus 0, IRQ 00, APIC ID ff, APIC LINT 01 Processors: 2 mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Kernel command line: auto BOOT_IMAGE=linux ro root=801 BOOT_FILE=/vmlinuz console=tty0 console=ttyS0,38400 Initializing CPU#0 Detected 400.918 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 799.53 BogoMIPS Memory: 899900k/917504k available (1035k kernel code, 17216k reserved, 320k data, 192k init, 0k highmem) Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) VFS: Diskquotas version dquot_6.5.0 initialized CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 CPU0: Intel Pentium II (Deschutes) stepping 02 per-CPU timeslice cutoff: 1464.26 usecs. Getting VERSION: 40011 Getting VERSION: 40011 Getting ID: 0 Getting ID: f000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 CPU present map: 3 Booting processor 1/1 eip 2000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1. After apic_write. Initializing CPU#1 Startup point 1. CPU#1 (phys ID: 1) waiting for CALLOUT Waiting for send to finish... +Sending STARTUP #2. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Before Callout 1. After Callout 1. CALLIN, before setup_local_APIC(). masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 801.17 BogoMIPS Stack at about c1efdfbc CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#1. CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 OK. CPU1: Intel Pentium II (Deschutes) stepping 02 CPU has booted. Before bogomips. Total of 2 processors activated (1600.71 BogoMIPS). Before bogocount - setting activated=1. Boot done. ENABLING IO-APIC IRQs ...changing IO-APIC physical APIC ID to 2 ... ok. Synchronizing Arb IDs. ..TIMER: vector=49 pin1=2 pin2=0 activating NMI Watchdog ... done. testing NMI watchdog ... OK. testing the IO APIC....................... .................................... done. calibrating APIC timer ... ..... CPU clock speed is 400.9157 MHz. ..... host bus clock speed is 100.2288 MHz. cpu: 0, clocks: 1002288, slice: 334096 CPU0 cpu: 1, clocks: 1002288, slice: 334096 CPU1 checking TSC synchronization across CPUs: passed. Setting commenced=1, go go go mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 PCI->APIC IRQ transform: (B0,I8,P0) -> 17 PCI->APIC IRQ transform: (B0,I10,P0) -> 18 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured block: queued sectors max/low 597898kB/466826kB, 1792 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio keyboard: Timeout - AT keyboard not present? hdc: CREATIVE CD5230E, ATAPI CD/DVD-ROM drive keyboard: Timeout - AT keyboard not present? ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 52X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10d Software Watchdog Timer: 0.05, timer margin: 60 sec SCSI subsystem driver Revision: 1.00 (scsi0) found at PCI 0/10/0 (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs (scsi0) Downloading sequencer code... 398 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.3/5.2.0 Vendor: WDIGTL Model: WDE18300 ULTRA2 Rev: 1.30 Type: Direct-Access ANSI SCSI revision: 02 (scsi0:0:1:0) Synchronous at 40.0 Mbyte/sec, offset 15. Vendor: IBM Model: DGHS09U Rev: 0350 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:0:2:0) Synchronous at 40.0 Mbyte/sec, offset 15. Vendor: IBM Model: DGHS09U Rev: 0350 Type: Direct-Access ANSI SCSI revision: 03 Vendor: ECRIX Model: VXA-1 Rev: 2848 Type: Sequential-Access ANSI SCSI revision: 02 st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. Attached scsi tape st0 at scsi0, channel 0, id 5, lun 0 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0 (scsi0:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 31. SCSI device sda: 35761710 512-byte hdwr sectors (18310 MB) Partition check: sda: sda1 sda2 sda3 SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB) sdb: sdb1 SCSI device sdc: 17916240 512-byte hdwr sectors (9173 MB) sdc: sdc1 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 65536 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 192k freed INIT: version 2.78 booting Loading /etc/kbd/default.kmap.gz Give root password for maintenance (or type Control-D for normal startup): Activating swap... Adding Swap: 1052248k swap-space (priority -1) Checking root file system... Parallelizing fsck version 1.19 (13-Jul-2000) e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 /dev/sda1: clean, 190430/1001920 files, 1250584/2000084 blocks Calculating module dependencies... done. Loading modules: 3c59x 3c59x.c:LK1.1.13 27 Jan 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt eth0: 3Com PCI 3c905B Cyclone 100baseTx at 0xe400, 00:50:04:af:5d:2e, IRQ 17 product code 544a rev 00.12 date 06-05-99 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 786d. Enabling bus-master transmits and whole-frame receives. eth0: scatter/gather disabled. h/w checksums enabled Checking all file systems... Parallelizing fsck version 1.19 (13-Jul-2000) e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 /dev/sdc1: clean, 1458/1121664 files, 107733/2239051 blocks /dev/sdb1: clean, 165801/1121664 files, 1537360/2239051 blocks /dev/sda3: clean, 40915/1105408 files, 857665/2206929 blocks Setting kernel variables. Loading the saved-state of the serial devices... Mounting local filesystems... /dev/sda3 on /home/vhosts/b type ext2 (rw,errors=remount-ro,usrquota) /dev/sdb1 on /home/vhosts/a type ext2 (rw,errors=remount-ro,usrquota) /dev/sdc1 on /www-logs type ext2 (rw,errors=remount-ro) Setting up IP spoofing protection: rp_filter. Configuring network interfaces: eth0: using NWAY device table, not 8 done. Setting the System Clock using the Hardware Clock as reference... System Clock set. Local time: Tue Mar 6 10:17:25 PST 2001 Cleaning: /tmp /var/lock /var/run. Initializing random number generator... done. INIT: Entering runlevel: 2 Starting system log daemon: syslogd klogd. Starting watchdog daemon: watchdog. Checking quotas...done. Turning on quotas. Starting domain name service: named. Starting internet superserver: inetd. Starting MySQL database server: mysqld. Starting mail transport agent: sendmail. Starting network management services: snmpd snmptrapd. Starting OpenBSD Secure Shell server: sshd. Starting pop daemon: cucipop. Starting professional ftp daemon: proftpd. Starting tuning kernel: systune. Starting deferred execution scheduler: atd. Starting periodic command scheduler: cron. Starting web server: apache. /usr/sbin/apachectl start: httpd started