2.4.2-pre3 and 2.4.1-ac9 sound corruption

From: Ole Andre Vadla Ravnaas (oleavr@online.no)
Date: Sat Feb 10 2001 - 12:20:32 EST

I've been using vanilla 2.4.1 with no problems, with my soundcard (SB PCI 128 / es1370) sharing IRQ with the USB-controller (this is an Abit KT7-RAID motherboard).
This is what /proc/interrupts tells me:
  0: 130808 XT-PIC timer
  1: 564 XT-PIC keyboard
  2: 0 XT-PIC cascade
  7: 12256 XT-PIC usb-uhci, usb-uhci, es1370
 10: 503 XT-PIC eth0
 11: 2916 XT-PIC ide2, ide3
 14: 16 XT-PIC ide0
 15: 11 XT-PIC ide1
NMI: 0
ERR: 0
After upgrading to 2.4.2-pre3 I get sound corruption (I believe this problem has existed since pre2, since I suspect the " - driver sync up with Alan" part of the changes in pre2 to be the source of the problem. I've also tried 2.4.1-ac9, which gives me the exact same problems (sound corruption, really "weird" sound).
Hope this is enough info to at least track down some problem if it hasn't been done already.

I'm not subscribed to the linux kernel mailing-list, so please CC to me any follow-ups and I'll do my best to track down the problem if more info about my system/configuration is needed.

Best regards,
Ole André Vadla Ravnås

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Thu Feb 15 2001 - 21:00:15 EST