Linux version 2.4.2-pre1 (bheadley@cactus.bheadley.org) (gcc version 2.96 20000731 (Red Hat Linux 7.0)) #1 SMP Sun Feb 4 15:57:05 CST 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009f400 @ 0000000000000000 (usable) BIOS-e820: 0000000000000c00 @ 000000000009f400 (reserved) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 000000000fefd000 @ 0000000000100000 (usable) BIOS-e820: 0000000000002000 @ 000000000fffd000 (ACPI data) BIOS-e820: 0000000000001000 @ 000000000ffff000 (ACPI NVS) BIOS-e820: 0000000000001000 @ 00000000fec00000 (reserved) BIOS-e820: 0000000000001000 @ 00000000fee00000 (reserved) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at 000f6df0 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. On node 0 totalpages: 65533 zone(0): 4096 pages. zone(1): 61437 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #1 Pentium(tm) Pro APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. PAT present. PSE present. MMX present. FXSR present. Bootup CPU Processor #0 Pentium(tm) Pro APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. PAT present. PSE present. MMX present. FXSR present. Bus #0 is PCI Bus #1 is PCI Bus #2 is ISA I/O APIC #2 Version 17 at 0xFEC00000. Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 2, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 2, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 0, trig 0, bus 2, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 2, APIC INT 10 Int: type 0, pol 3, trig 3, bus 0, IRQ 13, APIC ID 2, APIC INT 13 Int: type 0, pol 3, trig 3, bus 0, IRQ 24, APIC ID 2, APIC INT 13 Int: type 0, pol 3, trig 3, bus 0, IRQ 30, APIC ID 2, APIC INT 10 Lint: type 3, pol 1, trig 1, bus 2, IRQ 00, APIC ID ff, APIC LINT 00 Lint: type 1, pol 1, trig 1, bus 2, IRQ 00, APIC ID ff, APIC LINT 01 Processors: 2 mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Kernel command line: BOOT_IMAGE=linux-2.4.2pre1 ro root=801 BOOT_FILE=/boot/vmlinuz-2.4.2-pre1 console=ttyS0 Initializing CPU#0 Detected 451.032 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 897.84 BogoMIPS Memory: 254704k/262132k available (1253k kernel code, 7040k reserved, 457k data, 252k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 CPU0: Intel Pentium II (Deschutes) stepping 02 per-CPU timeslice cutoff: 1461.42 usecs. Getting VERSION: 40011 Getting VERSION: 40011 Getting ID: 1000000 Getting ID: e000000 Getting LVT0: 8700 Getting LVT1: 400 enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 CPU present map: 3 Booting processor 1/0 eip 2000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1. After apic_write. Initializing CPU#1 Startup point 1. CPU#1 (phys ID: 0) waiting for CALLOUT Waiting for send to finish... +Sending STARTUP #2. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Before Callout 1. After Callout 1. CALLIN, before setup_local_APIC(). masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 901.12 BogoMIPS Stack at about cfff5fb8 CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#1. CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 OK. CPU1: Intel Pentium II (Deschutes) stepping 02 CPU has booted. Before bogomips. Total of 2 processors activated (1798.96 BogoMIPS). Before bogocount - setting activated=1. Boot done. ENABLING IO-APIC IRQs ...changing IO-APIC physical APIC ID to 2 ... ok. Synchronizing Arb IDs. ..TIMER: vector=49 pin1=2 pin2=0 activating NMI Watchdog ... done. testing the IO APIC....................... .................................... done. calibrating APIC timer ... ..... CPU clock speed is 451.0544 MHz. ..... host bus clock speed is 100.2340 MHz. cpu: 0, clocks: 1002340, slice: 334113 CPU0 cpu: 1, clocks: 1002340, slice: 334113 CPU1 checking TSC synchronization across CPUs: passed. Setting commenced=1, go go go PCI: PCI BIOS revision 2.10 entry at 0xf0770, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:04.0 PCI->APIC IRQ transform: (B0,I4,P3) -> 19 PCI->APIC IRQ transform: (B0,I9,P0) -> 19 PCI->APIC IRQ transform: (B0,I12,P0) -> 16 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Limiting direct PCI/PCI transfers. isapnp: Scanning for Pnp cards... isapnp: SB audio device quirk - increasing port range isapnp: AWE32 quirk - adding two ports isapnp: Card 'Creative SB AWE64 PnP' isapnp: 1 Plug & Play card detected total Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket DMI 2.0 present. 33 structures occupying 1080 bytes. DMI table at 0x000F59FA. BIOS Vendor: Award Software, Inc. BIOS Version: ASUS P2B-D ACPI BIOS Revision 1006 BIOS Release: 09/15/98 System Vendor: System Manufacturer. Product Name: System Name. Version System Version. Serial Number SYS-1234567890. Board Vendor: ASUSTeK Computer INC.. Board Name: P2B-DS. Board Version: REV 1.xx. Asset Tag: Asset-1234567890. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) apm: disabled - APM is not SMP safe. Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 169184kB/56394kB, 512 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 21 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK: Compressed image found at block 0 Freeing initrd memory: 332k freed Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10d atp.c:v1.09 8/9/2000 Donald Becker http://www.scyld.com/network/atp.html md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md.c: sizeof(mdp_super_t) = 4096 autodetecting RAID arrays autorun ... ... autorun DONE. ACPI: Core Subsystem version [20010125] LNMI Watchdog detected LOCKUP on CPU0, registers: CPU: 0 EIP: 0010:[] EFLAGS: 00000086 eax: 00000000 ebx: 000f8040 ecx: 00000001 edx: c0272b42 esi: cfd6ff70 edi: cfd6e331 ebp: 00000000 esp: cfd6ff48 ds: 0018 es: 0018 ss: 0018 Process kacpid (pid: 7, stackpage=cfd6f000) Stack: 00000286 00070000 00c70000 c01c10c1 000f8040 cfd6ff70 cfd6e331 00000000 c01d47fa c0272b42 0000003c cfd6ffa0 000f8040 00000000 00000000 00000000 00000000 00000000 cfd6e000 00000000 00000001 cfd6e000 20010125 00000003 Call Trace: [] [] [] [] [] Code: 80 3d 20 50 29 c0 00 f3 90 7e f5 e9 93 5c ee ff 80 3d 20 50 console shuts up ...