A patch against kernel 2.4.0 final which provides low-latency
scheduling is at
http://www.uow.edu.au/~andrewm/linux/schedlat.html#downloads
Some notes:
- Worst-case scheduling latency with *very* intense workloads is now
0.8 milliseconds on a 500MHz uniprocessor.
For normal workloads you can expect to achieve better than 0.5
milliseconds for ever. For example, worst-case latency between entry
to an interrupt routine and activation of a usermode process during a
`make clean && make bzImage' is 0.35 milliseconds. This is one to
three orders of magnitude better than BeOS, MacOS and the Windowses.
- Low latency is enabled from the `Processor type and features'
kernel configuration menu for all architectures. It would be nice to
hear from non-x86 users.
- The SMP problem hasn't been addressed. Enabling low-latency for
SMP works well under normal workloads but comes unstuck under very
heavy workloads. I'll be taking a further look at this.
- The supporting tools `rtc_debug' and `amlat' have been updated.
These are quite useful tools for providing accurate measurement of
latencies. They may also be used to identify the causes of poor
latency in the kernel.
- Remaining problem areas (the Don't Do That list) is pretty small:
- Scrolling the fb console.
- Running hdparm.
- Using LILO
- Starting the X server
- Low latency will probably only be achieved when using the ext2 and
NFS filesystems.
- If you care about latency, be *very* cautious about upgrading to
XFree86 4.x. I'll cover this issue in a separate email, copied
to the XFree team.
-
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jan 07 2001 - 21:00:26 EST