Re: Problem with SYSV IPC

From: Christoph Rohland (cr@sap.com)
Date: Mon Dec 18 2000 - 10:21:20 EST


Hi Janne,

On 21 Nov 2000, Janne Himanka wrote:
> I have compiled 2.4.0-test10 and 2.4.0-test11 kernels, mounted
> /dev/shm and tried to install the Perl IPC::Shareable module. "make
> test" produces a lot of errors (sample below), and a message from
> the kernel appears in /var/log/messages. I am using a Compaq PIII
> 866MHz, Redhat 7.0. I compiled test10 with gcc 2.96 anf kgcc, test11
> with kgcc, all produced more or less the same results. SYSV IPC is
> configured in the kernel. No modules were loaded at the time of
> failure. After the failure the machine functions normally. X
> apparently uses shared memory without problems. I attach also the
> ksymoops output.

Could you test this on 2.4.0-test13-pre3?

Greetings
                Christoph

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Dec 23 2000 - 21:00:21 EST