Hello guys,
Configuring a new box based on ASUS CUR-DLS dual Pentium III, 1GB RAM and
using
the new LSI SYM53C896 SCSI interface.
Question: How to get sym53c8xx and eepro100 activated at start-up
procedure ?
Thanks for your help.
e_soriano@dapsys.com
Description:
Version used is Linux 2.2.17 dowloaded from kernel.org with Redhat 6.1
(2.2.12-20)
Step 1
When configuring this system from scratch using the RedHat 6.1 CD-ROM the
system
reconize both the integrated interfaces LSI as well as the Intel 82559
Ethernet controller.
Fine.
Problem is that Linux version has no updated drivers for the high speed
LSI controller (160 Mbs)
So I downloaded 2.2.17 from kernel.org and sy1.6b-2.2.17.tar.gz from
ftp.lsil.com.HostAdapterDrivers/linux/c8xx-driver
Compiled and intalled.
conf.modules:
depfile=/lib/modules/`uname -r`/modules.dep
alias scsi_hostadapter BusLogic
alias scsi_hostadapter1 sym53c8xx
alias scsi_hostadapter2 sym53c8xx
alias eth0 eepro100
lilo.conf:
boot=/dev/sda
map=/boot/map
install=/boot/boot.b
prompt
timeout=50
default=linux
image=/boot/vmlinuz-2.2.17smp
label=linux
initrd=/boot/initrd-2.2.17smp.img
read-only
root=/dev/sda1
image=/boot/vmlinuz-2.2.12-20smp
label=linux-sv
initrd=/boot/initrd-2.2.12-20smp.img
read-only
root=/dev/sda1
image=/boot/vmlinuz-2.2.12-20
label=linux-up
initrd=/boot/initrd-2.2.12-20.img
read-only
root=/dev/sda1
Problem: both controllers LSI and Intel are not recognized during
startup.
So, once the system started, I need to enter:
insmod sym53c8xx with the following good results:
Dec 7 21:10:09 localhost kernel: sym53c1010-1: Symbios format NVRAM, ID
7, Fast-80, Parity Checking
Dec 7 21:10:09 localhost kernel: sym53c1010-1: initial
SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/4e/a0/01/00/04
Dec 7 21:10:09 localhost kernel: sym53c1010-1: final
SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/4e/80/00/08/04
Dec 7 21:10:09 localhost kernel: sym53c1010-1: on-chip RAM at 0xf7000000
Dec 7 21:10:09 localhost kernel: sym53c1010-1: resetting, command
processing suspended for 2 seconds
Dec 7 21:10:09 localhost kernel: sym53c1010-1: restart (scsi reset).
Dec 7 21:10:09 localhost kernel: sym53c1010-1: enabling clock multiplier
Dec 7 21:10:09 localhost kernel: sym53c1010-1: handling phase mismatch
from SCRIPTS.
Dec 7 21:10:09 localhost kernel: sym53c1010-1: Downloading SCSI SCRIPTS.
Dec 7 21:10:09 localhost kernel: scsi1 : sym53c8xx - version 1.6b
Dec 7 21:10:09 localhost kernel: scsi2 : sym53c8xx - version 1.6b
Dec 7 21:10:09 localhost kernel: scsi : 3 hosts.
Dec 7 21:10:11 localhost kernel: sym53c1010-0: command processing
resumed
Dec 7 21:10:11 localhost kernel: Vendor: IBM Model: DCAS-34330W
Rev: S65A
Dec 7 21:10:11 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 02
Dec 7 21:10:11 localhost kernel: Detected scsi disk sdb at scsi1,
channel 0, id 0, lun 0
Dec 7 21:10:11 localhost kernel: Vendor: QUANTUM Model: VIKING 4.5
WSE Rev: 8808
Dec 7 21:10:11 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 02
Dec 7 21:10:11 localhost kernel: Detected scsi disk sdc at scsi1,
channel 0, id 1, lun 0
Dec 7 21:10:11 localhost kernel: sym53c1010-1: command processing
resumed
Dec 7 21:10:19 localhost kernel: sym53c1010-0-<0,0>: tagged command
queue depth set to 4
Dec 7 21:10:19 localhost kernel: sym53c1010-0-<1,0>: tagged command
queue depth set to 4
Dec 7 21:10:28 localhost kernel: sym53c1010-0-<0,*>: FAST-20 SCSI 20.0
MB/s (50 ns, offset 15)
Dec 7 21:10:28 localhost kernel: SCSI device sdb: hdwr sector= 512
bytes. Sectors= 8467200 [4134 MB] [4.1 GB]
Dec 7 21:10:28 localhost kernel: sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8
sdb9 >
Dec 7 21:10:28 localhost kernel: sym53c1010-0-<1,*>: FAST-20 SCSI 20.0
MB/s (50 ns, offset 30)
Dec 7 21:10:28 localhost kernel: SCSI device sdc: hdwr sector= 512
bytes. Sectors= 8899737 [4345 MB] [4.3 GB]
Dec 7 21:10:28 localhost kernel: sdc: sdc1
Dec 7 21:11:22 localhost kernel: SCSI device sdb: hdwr sector= 512
bytes. Sectors= 8467200 [4134 MB] [4.1 GB]
Dec 7 21:11:22 localhost kernel: sdb: sdb1
Dec 7 21:11:24 localhost kernel: SCSI device sdb: hdwr sector= 512
bytes. Sectors= 8467200 [4134 MB] [4.1 GB]
Dec 7 21:11:24 localhost kernel: sdb: sdb1
Same schema with Intel Ethernet controller:
insmod eepro100 with the following good results:
Dec 8 11:15:27 localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald
Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
Dec 8 11:15:27 localhost kernel: eepro100.c: $Revision: 1.20.2.10 $
2000/05/31 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Dec 8 11:15:27 localhost kernel: eth0: OEM i82557/i82558 10/100
Ethernet, 00:E0:18:02:7D:CA, I/O at 0xd800, IRQ 20.
Dec 8 11:15:27 localhost kernel: Board assembly 668081-002, Physical
connectors present: RJ45
Dec 8 11:15:27 localhost kernel: Primary interface chip i82555 PHY #1.
Dec 8 11:15:27 localhost kernel: General self-test: passed.
Dec 8 11:15:27 localhost kernel: Serial sub-system self-test: passed.
Dec 8 11:15:27 localhost kernel: Internal registers self-test: passed.
Dec 8 11:15:27 localhost kernel: ROM checksum self-test: passed
(0x04f4518b).
Dec 8 11:15:27 localhost kernel: Receiver lock-up workaround
activated.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Dec 15 2000 - 21:00:14 EST