Linux 2.2.18pre20 MEGARAID hang

From: Brian Marsden (marsden@scripps.edu)
Date: Thu Nov 09 2000 - 15:37:06 EST

2.2.18pre20 (still) hangs on boot when it gets to the part where it
detects the MEGARAID card.

This is a shame, since 2.2.18 with NFS3 would be very nice on a big
filestore such as the one this is running on.

Further details:

lspci:

00:00.0 Host bridge: ServerWorks CNB20HE (rev 05)
00:00.1 Host bridge: ServerWorks CNB20HE (rev 05)
00:02.0 PCI bridge: Intel Corporation 80960RP [i960 RP
Microprocessor/Bridge] (rev 05)
00:02.1 SCSI storage controller: Intel Corporation 80960RP [i960RP
Microprocessor] (rev 05)
00:04.0 VGA compatible controller: Trident Microsystems Blade 3D PCI/AGP
(rev 3a)
00:06.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100]
(rev 08)00:0f.0 ISA bridge: ServerWorks OSB4 (rev 4f)
00:0f.1 IDE interface: ServerWorks: Unknown device 0211
00:0f.2 USB Controller: ServerWorks: Unknown device 0220 (rev 04)
02:02.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100]
(rev 08)

dmesg (from 2.2.17 on the same machine) attached.

.config for 2.2.18pre20 attached.

If I can help more, please CC me as I am not subscribed to this list.

Brian Marsden 

-- 
---------------------------------------------------------------------
 Brian Marsden        			  Email: marsden@scripps.edu
 TSRI, San Diego, USA.  Phone: +1 858 784 8698  Fax: +1 858 784 8299
---------------------------------------------------------------------
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Wed Nov 15 2000 - 21:00:15 EST