Sigh. That's not the real hang position. I needed to step slower.
kdb> ss
0xc01100f8 pci_conf1_write_config_word+0x40: outw %ax,(%dx)
SS trap at 0xc01100fa (pci_conf1_write_config_word+0x42)
0xc01100fa pci_conf1_write_config_word+0x42: popl %ebx
kdb> ss
0xc01100fa pci_conf1_write_config_word+0x42: popl %ebx
SS trap at 0xc01100fb (pci_conf1_write_config_word+0x43)
0xc01100fb pci_conf1_write_config_word+0x43: xorl %eax,%eax
kdb> ss
0xc01100fb pci_conf1_write_config_word+0x43: xorl %eax,%eax
SS trap at 0xc01100fd (pci_conf1_write_config_word+0x45)
0xc01100fd pci_conf1_write_config_word+0x45: popl %esi
kdb> ss
0xc01100fd pci_conf1_write_config_word+0x45: popl %esi
SS trap at 0xc01100fe (pci_conf1_write_config_word+0x46)
0xc01100fe pci_conf1_write_config_word+0x46: movl %ebp,%esp
kdb> ss
0xc01100fe pci_conf1_write_config_word+0x46: movl %ebp,%esp
SS trap at 0xc0110100 (pci_conf1_write_config_word+0x48)
0xc0110100 pci_conf1_write_config_word+0x48: popl %ebp
kdb> ss
0xc0110100 pci_conf1_write_config_word+0x48: popl %ebp
SS trap at 0xc0110101 (pci_conf1_write_config_word+0x49)
0xc0110101 pci_conf1_write_config_word+0x49: ret
kdb> ss
0xc0110101 pci_conf1_write_config_word+0x49: ret
SS trap at 0xc020c7af (pci_write_config_word+0x2b)
0xc020c7af pci_write_config_word+0x2b: pushl %ebx
kdb> ss
0xc020c7af pci_write_config_word+0x2b: pushl %ebx
SS trap at 0xc020c7b0 (pci_write_config_word+0x2c)
0xc020c7b0 pci_write_config_word+0x2c: popf
kdb> ss
0xc020c7b0 pci_write_config_word+0x2c: popf
Here is where it hung this time. Register dump below.
usb-uhci.c: $Revision: 1.242 $ time 20:13:32 Nov 8 2000
usb-uhci.c: High bandwidth mode enabled
Instruction(i) breakpoint #0 at 0xc03f5a8c (adjusted)
0xc03f5a8c start_uhci: pushl %ebp
Entering kdb (current=0xcfff4000, pid 1) due to Breakpoint @ 0xc03f5a8c
kdb> bp pci_write_config_word+0x2c
Instruction(i) BP #1 at 0xc020c7b0 (pci_write_config_word+0x2c)
is enabled globally adjust 1
kdb> g
Instruction(i) breakpoint #1 at 0xc020c7b0 (adjusted)
0xc020c7b0 pci_write_config_word+0x2c: popf
Entering kdb (current=0xcfff4000, pid 1) due to Breakpoint @ 0xc020c7b0
kdb> rd
eax = 0x00000000 ebx = 0x00000256 ecx = 0x000000c0 edx = 0x00000cfc
esi = 0x000000c0 edi = 0xc144c800 esp = 0xcfff5f74 eip = 0xc020c7b0
ebp = 0xcfff5f90 xss = 0x00000018 xcs = 0x00000010 eflags = 0x00000046
xds = 0xc1440018 xes = 0x00000018 origeax = 0xffffffff ®s = 0xcfff5f40
0xc020c7aa pci_write_config_word+0x26: movl 0x10(%edx),%eax
0xc020c7ad pci_write_config_word+0x29: call *%eax
0xc020c7af pci_write_config_word+0x2b: pushl %ebx
0xc020c7b0 pci_write_config_word+0x2c: popf
0xc020c7b1 pci_write_config_word+0x2d: jmp 0xc020c7bc
pci_write_config_word+0x38
0xc020c7b3 pci_write_config_word+0x2f: nop
0xc020c7b4 pci_write_config_word+0x30: movl $0x87,%eax
0xc020c7b9 pci_write_config_word+0x35: leal 0x0(%esi),%esi
0xc020c7bc pci_write_config_word+0x38: leal 0xfffffff4(%ebp),%esp
I'm going to have to drop this debug shortly and return to my regular work :(
-d
-- "The difference between 'involvement' and 'commitment' is like an eggs-and-ham breakfast: the chicken was 'involved' - the pig was 'committed'."
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Nov 15 2000 - 21:00:13 EST