Re: eepro100: card reports no resources [was VM-global...]

From: Simon Kirby (sim@stormix.com)
Date: Tue Oct 31 2000 - 13:23:06 EST


On Mon, Oct 30, 2000 at 02:23:56PM +0800, Andrey Savochkin wrote:

> > > > Oct 26 16:38:01 ns29 kernel: eth0: card reports no resources.
> > > >
> > > let me guess: intel eepro100 or similar??
> > > Well known problem with that one. dont know if its fully fixed ... With
> >
> > Happens here too, with 2xPPro200, 2.2.18pre17, Eepro100 and light load.
> > The network stalls for several minutes when it happens.
> >
> > > 2.4.0-test9-pre3 it doesnt happen on my machine ...
> >
> > What about a fix for a 2.2.x...?
>
> The exact reason for this problem is still unknown.

We were seeing this on a firewall a week or so ago -- it was actually
coming from some sort of arp flood/loop on the uplink not being caused by
us, and the speed of the incoming arp packets would cause these messages
to occur.

We tried ifconfig up/down, warm reboot, cold reboot, power cycle, card
swapping, and the messages continued. We stopped the card with a 3c905
and the messages stopped, but "ifconfig" showed Rx overruns at about the
same frequency as the messages used to occur. This is probably another
way to trigger this error than what most people are seeing.

Simon-

[ Stormix Technologies Inc. ][ NetNation Communications Inc. ]
[ sim@stormix.com ][ sim@netnation.com ]
[ Opinions expressed are not necessarily those of my employers. ]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Oct 31 2000 - 21:00:30 EST