Re: Hudge collection of Oops ;-) (DVB and bttv

From: Favre Gregoire (
Date: Sat Oct 14 2000 - 08:54:08 EST

On Sat, Oct 14, 2000 at 01:19:50PM +0200, Torben Mathiasen wrote:
> >
> It would be much easier if you could try to narrow down exacly what breaks.
> If these opps's are reproduceable, please try removing some of your drivers.
> SCSI had an overhaul lately, so it seem like a good place to start.

Well, for sure after every dvb released (I have only one dvb card, the other is
one bttv), I got in dmesg:
bttv0: i2c detach [Philips PAL]
i2c-core.o: client [Philips PAL] unregistered.
bttv0: i2c detach [MSP3410D-B4]
i2c-core.o: client [MSP3410D-B4] unregistered.
bttv0: i2c detach [ir]
i2c-core.o: client [ir] unregistered.
i2c-core.o: adapter unregistered: bt848 #0
dvb: ARM firmware successfully loaded.
dvb: firmware = f0240009
dvb: MAC = 00 d0 5c 00 41 90
dvb: attach_adapter
i2c-core.o: driver unregistered: dvbi2c
dvb: 2 dvb(s) released properly.
Unable to handle kernel paging request at virtual address d3323548

Maybe that's came from the way I autoload them in modules.conf:
alias char-major-81 dvb
alias char-major-81-0 dvb
options saa7146_core mode=0
pre-install dvb modprobe i2c-core; modprobe videodev; modprobe saa7146_core; modprobe saa7146_v4l
post-install dvb modprobe VES1893; modprobe dvb-tuner; modprobe msp3400

# bttv
alias char-major-81-1 bttv
pre-install bttv modprobe msp3400; modprobe tuner ; modprobe lirc_haup
options bttv radio=1 card=10
options tuner debug=1 type=5

Do someone know a good way to autoload these modules (and I don't want them to unregister...)?

Thanks you very much, and if I need to compil a kernel with some option less, just tell me,
and please, keep CCing to me, I am not on the list...

________________________________________________________________ ICQ:16624071
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
Please read the FAQ at

This archive was generated by hypermail 2b29 : Sun Oct 15 2000 - 21:00:27 EST