sb problems in 2.4.0-test7

From: Eric Boo (marveric@singnet.com.sg)
Date: Fri Aug 25 2000 - 01:59:19 EST

('binary' encoding is not supported, stored as-is) Hi,
 
I'm using sb16. Since changing to 2.4.0-test7, it's not working
anymore. Used to work for test5.
 
/var/log/messages
Aug 24 12:57:33 localhost kernel: Soundblaster audio driver Copyright
(C) by Hannu Savolainen 1993-1996
Aug 24 12:57:33 localhost kernel: sb: No ISAPnP cards found, trying
standard ones...
Aug 24 12:57:33 localhost kernel: SB 4.11 detected OK (220)
Aug 24 12:57:33 localhost kernel: sb: I/O region in use.
Aug 24 12:57:33 localhost kernel: Sound: Hmm, DMA1 was left allocated
- fixed
Aug 24 12:57:33 localhost kernel: Sound: Hmm, DMA5 was left allocated
- fixed
 
/etc/modules.conf says:
alias sound sb
#alias char-major-14 sb
#post-install sb
options sb io=0x220 irq=5 dma=1 dma16=7 mpu_io=0x330

I experimented with commenting and uncommenting the above, with no
success
 
cat /proc/ioports /proc/interrupts and /proc/dma all showed that the
relevant areas are not used.
 
modprobe sb did not succeed.
 
Switching back to test5 works.

Any help?
 
Thanks 

-- 
Eric Boo
Friday, August 25, 2000, 02:50 PM

http://magicman.freeshell.org
------------------------------------

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Thu Aug 31 2000 - 21:00:15 EST