On Thu, Aug 10, 2000 at 01:05:10PM +0200, Olivier Baudron wrote:
Sorry, i'm mistaken.
i get new source from ftp ,and compiled , it works well..
Thanx.
> Young-Ho Cha wrote:
>
> > I can't load drm module for mga (mga.o) in linux 2.4.0-test6.
> > When I loaded drm module,
> > [root@ganadist root]# modprobe mga
> > /lib/modules/2.4.0-test6/misc/mga.o: init_module: Cannot allocate memory
> > Hint: insmod errors can be caused by incorrect module parameters, including
> > invalid IO or IRQ parameters
> > but i laoded agpgart.
> > I use well in test6-pre*.
>
> On my PC (PIII-450, Intel 440BX Chipset, Matrox G400) mga module works well with
> test-pre* and test6. I also checked that accelerated openGL still works with
> test6. My .config file reads:
>
> CONFIG_AGP=m
> CONFIG_AGP_INTEL=y
> # CONFIG_AGP_I810 is not set
> # CONFIG_AGP_VIA is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_ALI is not set
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_GAMMA is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_I810 is not set
> CONFIG_DRM_MGA=m
>
> And lsmod shows:
>
> Module Size Used by
> mga 103864 0
> agpgart 13444 8
>
> Are you sure you can see agpart when you type 'lsmod' ?
> Otherwise, I noticed that CONFIG_DRM cannot be set to 'm' in test6 whereas it
> was possible in test6-pre9. So if you import you .config from test6-pre9, you
> shoud try to set this option to 'y' and recompile everything.
>
> Olivier.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Aug 15 2000 - 21:00:23 EST