Re: kernel 2.4.0 ac19 and IDE on the i-opener

From: Mike Panetta (mpanetta@applianceware.com)
Date: Fri Jun 16 2000 - 23:54:59 EST


So whats the problem? Is the drive blacklisted or something?
This kernel boots fine on a machine that does not have the
via chipset... So something is either wrong with the chipset
or with the driver no? Does anyone know the answer to this?

On Wed, Jun 14, 2000 at 11:37:16PM -0700, Andre Hedrick wrote:
> On Thu, 15 Jun 2000, Mike Panetta wrote:
>
> > I have been trying to get the 2.4 series of kernels
> > running on the i-opener to no avail. Here is what I am
> > getting:
> >
> > o It boots fine and detects the ide controller and sets the
> > bus speed to 33MHz.
> > o It then detects both hda and hdb, hda is a quantum 127AT go drive,
>
> ?? "quantum 127AT go drive" huh
>
> > hdb is the sandisk 16MB compact flash.
> > o It then goes to do the partition check and pauses for a few seconds
> > and only shows the partitions of hdb (the flash).
> >

-- 

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Fri Jun 23 2000 - 21:00:14 EST