activated (2018.51 BogoMIPS). Before bogocount - setting activated=1. Boot done. ENABLING IO-APIC IRQs ...changing IO-APIC physical APIC ID to 2 ... ok. Synchronizing Arb IDs. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-9, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=81 pin1=2 pin2=0 activating NMI Watchdog ... done. number of MP IRQ sources: 22. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 0FF 0F 0 0 0 0 0 1 1 59 02 0FF 0F 0 0 0 0 0 1 1 51 03 0FF 0F 0 0 0 0 0 1 1 61 04 0FF 0F 0 0 0 0 0 1 1 69 05 0FF 0F 0 0 0 0 0 1 1 71 06 0FF 0F 0 0 0 0 0 1 1 79 07 0FF 0F 0 0 0 0 0 1 1 81 08 0FF 0F 0 0 0 0 0 1 1 89 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 0FF 0F 0 0 0 0 0 1 1 91 0d 000 00 1 0 0 0 0 0 0 00 0e 0FF 0F 0 0 0 0 0 1 1 99 0f 0FF 0F 0 0 0 0 0 1 1 A1 10 0FF 0F 1 1 0 1 0 1 1 A9 11 0FF 0F 1 1 0 1 0 1 1 B1 12 0FF 0F 1 1 0 1 0 1 1 B9 13 0FF 0F 1 1 0 1 0 1 1 C1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ5 -> 5 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ12 -> 12 IRQ13 -> 13 IRQ14 -> 14 IRQ15 -> 15 IRQ16 -> 16 IRQ17 -> 17 IRQ18 -> 18 IRQ19 -> 19 .................................... done. calibrating APIC timer ... ..... CPU clock speed is 505.9904 MHz. ..... host bus clock speed is 91.9980 MHz. cpu: 0, clocks: 919980, slice: 306660 CPU0 cpu: 1, clocks: 919980, slice: 306660 CPU1 checking TSC synchronization across CPUs: passed. Setting commenced=1, go go go mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfb6d0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7000] at 00:07.0 PCI->APIC IRQ transform: (B0,I7,P3) -> 19 PCI->APIC IRQ transform: (B0,I11,P0) -> 18 PCI->APIC IRQ transform: (B0,I13,P0) -> 17 PCI->APIC IRQ transform: (B0,I15,P0) -> 16 PCI->APIC IRQ transform: (B0,I17,P0) -> 19 PCI->APIC IRQ transform: (B0,I19,P0) -> 18 PCI->APIC IRQ transform: (B0,I19,P1) -> 18 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Limiting direct PCI/PCI transfers. usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.228 $ time 22:13:01 May 14 2000 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: Intel USB controller: setting latency timer to 0 usb-uhci.c: USB UHCI at I/O 0xc000, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: USB new device connect, assigned device number 1 hub.c: USB hub found hub.c: 2 ports detected Linux NET4.0 for Linux 2.3 Based upon Swansea University Computer Society NET3.039 kmem_create: Poisoning requested, but con given - skbuff_head_cache NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) Initializing RT netlink socket P6 Microcode Update Driver v1.03 registered ACPI: "ABIT" found at 0x000f7550 Starting kswapd v1.6 i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-algo-bit.o: i2c bit algorithm module pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: registered device at major 7 loop: enabling 8 loop devices Uniform Multi-Platform E-IDE driver Revision: 6.30 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio HPT366: onboard version of chipset, pin1=1 pin2=2 HPT366: IDE controller on PCI bus 00 dev 98 HPT366: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xd800-0xd807, BIOS settings: hde:pio, hdf:pio HPT366: IDE controller on PCI bus 00 dev 99 HPT366: not 100% native mode: will probe irqs later ide3: BM-DMA at 0xe400-0xe407, BIOS settings: hdg:pio, hdh:pio hda: QUANTUM FIREBALL EX10.2A, ATA DISK drive hdb: QUANTUM FIREBALL CR13.0A, ATA DISK drive hdc: TOSHIBA CD-ROM XM-6602B, ATAPI CDROM drive hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 20044080 sectors (10263 MB) w/418KiB Cache, CHS=1247/255/63, UDMA(33) hdb: 25429824 sectors (13020 MB) w/418KiB Cache, CHS=1582/255/63, UDMA(33) hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.08 hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdd: set_drive_speed_status: error=0x02 hdd: 98304kB, 32/64/96 CHS, 4096 kBps, 512 sector size, 2941 rpm Partition check: /dev/ide/host0/bus0/target0/lun0: p1 /dev/ide/host0/bus0/target1/lun0: p1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 (scsi0) found at PCI 0/13/0 (scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs (scsi0) Downloading sequencer code... 422 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.0/3.2.4 scsi : 1 host. (scsi0:0:6:0) Synchronous at 10.0 Mbyte/sec, offset 8. Vendor: MATSHITA Model: CD-R CW-7502 Rev: 4.17 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0 scsi : detected 1 SCSI cdrom total. sr0: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray Serial driver version 4.93 (2000-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10c ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html eth0: KTI ET32P2 found at 0xc400, IRQ 18, 00:40:F6:14:A5:75. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 94M agpgart: Detected Intel 440BX chipset agpgart: AGP aperture is 64M @ 0xd0000000 devfs: v0.96 (20000430) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 kmem_create: Forcing size word alignment - nfs_fh VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 196k freed Adding Swap: 131064k swap-space (priority -1) nfs warning: mount version older than kernel Linux video capture interface: v1.00 i2c-core.o: driver i2c TV tuner driver registered.