Brian Kress wrote:
>
> Andre Hedrick wrote:
> >
> > No........It seams that I have the only "BP6 HPT366" that works.....
> >
>
> Do you have anything on the secondary interface for that?
> my HPT366 (BP6) works great with a drive on on the first interface
> (ide4) or the second (ide5). If I put drives on both, it's crash
> city, especially when both are active at once (raid5)
>
> Brian Kress
> kressb@icp.siemens.com
>
You should be able to run two drives ok.
I can run two drives on any position on my onboard [PIIX4 or VIA] and
HPT366 controllers.
If i put two drives on one controller, and one on the other, then i am
reduced to non dma mode.
It only happens under load, a simple test i do is "cat /dev/hd?
>/dev/null" for each drive simulataneously.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 15 2000 - 21:00:21 EST