On Thu, 11 May 2000, Thomas Molina wrote:
> Earlier I sent in a report of an oops which only included the EIP and
> some comments. Following is a better report which includes ksymoops
> output. I'm forwarding it to Trevor Adams since he also reported a
> similar oops with pre7-9.
<snip>
> >>EIP; c015de86 <proc_kill_inodes+6/48> <=====
> Trace; c015e36c <remove_proc_entry+ac/110>
> Trace; c024f3b4 <parport_device_sysctl_template+214/1100>
> Trace; c011d49c <unregister_proc_table+60/78>
> Trace; c024f3b4 <parport_device_sysctl_template+214/1100>
> Trace; c011d479 <unregister_proc_table+3d/78>
> Trace; c011d479 <unregister_proc_table+3d/78>
> Trace; c011d479 <unregister_proc_table+3d/78>
> Trace; c011d479 <unregister_proc_table+3d/78>
> Trace; c011d479 <unregister_proc_table+3d/78>
> Trace; c011d30e <unregister_sysctl_table+1e/2c>
> Trace; c019ff03 <parport_device_proc_unregister+1b/28>
> Trace; c019d250 <parport_unregister_device+c/a0>
> Trace; c01a0246 <parport_close+a/10>
> Trace; c01a0f4b <parport_device_id+16f/184>
> Trace; c01a00f2 <parport_daisy_init+112/12c>
> Trace; c019ce6b <parport_announce_port+f/ac>
> Trace; c0276d89 <timer_bug_msg+1a09/306e>
> Trace; c015e282 <create_proc_entry+10a/118>
> Trace; ffff81a4 <END_OF_CODE+3fce87f4/????>
> Trace; c015de07 <proc_register+f/88>
> Trace; c0276d85 <timer_bug_msg+1a05/306e>
> Trace; c011d3d8 <register_proc_table+bc/120>
> Trace; c0276d85 <timer_bug_msg+1a05/306e>
> Trace; c027416d <prio2band+1fc8/31db>
> Trace; c015de87 <proc_kill_inodes+7/48>
> Trace; c024f193 <parport_sysctl_template+353/360>
> Trace; c015e282 <create_proc_entry+10a/118>
> Trace; ffff81a4 <END_OF_CODE+3fce87f4/????>
> Trace; c015de07 <proc_register+f/88>
> Trace; c024f18a <parport_sysctl_template+34a/360>
> Trace; c011d3d8 <register_proc_table+bc/120>
> Trace; c024f18a <parport_sysctl_template+34a/360>
> Trace; c024416d <border+41/4c>
> Trace; c024416d <border+41/4c>
> Trace; c0105000 <empty_bad_page+0/1000>
> Trace; c010709f <init+7/158>
> Trace; c0108e2f <kernel_thread+23/30>
Hi Thomas,
Sequence problem.. see chicken/egg in log below.
-Mike
.....
Starting kswapd v1.6
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 16
0x378: readIntrThreshold is 16
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x40
0x378: ECP settings irq=<none or set by other means> dma=<none or set by other means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
remove_proc_entry(): proc_mnt is NULL. <=== chicken
remove_proc_entry(): proc_mnt is NULL.
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
remove_proc_entry(): proc_mnt is NULL.
remove_proc_entry(): proc_mnt is NULL.
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: registered device at major 7
loop: enabling 8 loop devices
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 66MHz system bus speed for PIO modes
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: not 100% native mode: will probe irqs later
VT 82C691 Apollo Pro
Chipset Core ATA-66
Split FIFO Configuration: 8 Primary buffers, threshold = 1/2
8 Second. buffers, threshold = 1/2
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
ide0: VIA Bus-Master (U)DMA Timing Config Success
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio
ide1: VIA Bus-Master (U)DMA Timing Config Success
hda: IBM-DJNA-352030, ATA DISK drive
hdc: MATSHITADVD-ROM SR-8583A, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39876480 sectors (20417 MB) w/1966KiB Cache, CHS=2482/255/63
hdc: ATAPI 32X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.07
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
init_proc_fs(): err is 0 <=== egg
Serial driver version 4.93 (2000-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
......
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 15 2000 - 21:00:20 EST