Actually I have said that. I've said something more. There are not ANY
IDE controllers in the system besides the Promise card. This is an older
Pentium board, back before it was standard to add things onto the chipset
like IDE.
I repeat again: I have only the Promise card. There is nothing else
IDE-related in the system, in PCI or on the motherboard.
af
On Tue, 2 May 2000 ferret@phonewave.net wrote:
>
> I don't think you've said if you disabled your mobo chipset's integrated
> IDE controller or not, the ones legacied to 0x1f0 and 0x170. If you
> disabled BOTH those ports or you have the 'boot offboard controllers
> first' option in your kernel, then your offboard controller should be
> mapped to ide0 and ide1, IMO. It makes logical sense to me since IDE ports
> seem to come in pairs these days, excepting ISA interfaces. ;)
>
>
> On Tue, 2 May 2000, Adam Fritzler wrote:
>
> >
> > I'll take that. I would say that it probably should be ttyS0, but I think
> > the serial ports are a major exception in the current design of
> > things. But I don't advocate changing that. Convention has led it ttySx
> > to be defined as they are now. I could care less. I can fiddle with that
> > once my machine is booted.
> >
> > My ide problem is a bit more tragic. We could blame it on LILO. It
> > should be able to see that hde really is the first drive on the first
> > controller in the system (0x80 by BIOS). And it should work around it,
> > and not just give up and spit out a message saying it can't install lilo
> > onto the MBR of the fifth drive in the system.
> >
> > But theres convention here too. And for Linux, the convention happens to
> > be documented... (Documentation/devices.txt)
> >
> > block First MFM, RLL and IDE hard disk/CD-ROM interface
> > 0 = /dev/hda Master: whole disk (or CD-ROM)
> > 64 = /dev/hdb Slave: whole disk (or CD-ROM)
> >
> > For partitions, add to the whole disk device number:
> > 0 = /dev/hd? Whole disk
> > 1 = /dev/hd?1 First partition
> > 2 = /dev/hd?2 Second partition
> > ...
> > 63 = /dev/hd?63 63rd partition
> >
> > For Linux/i386, partitions 1-4 are the primary
> > partitions, and 5 and above are logical partitions.
> > Other versions of Linux use partitioning schemes
> > appropriate to their respective architectures.
> >
> >
> > How about that. "First...IDE...interface... /dev/hda". I have a single
> > master connected to a single controller. Why don't I have an hda? (Yes,
> > you can get an hdc even if you don't have an hdb. I don't have all the
> > answers.)
> >
> > I could also point out that SCSI numbers everything starting from
> > zero. And your first SCSI drive on the first controller will always be
> > sda (as far as I know).
> >
> > Should I make a patch for Documentation/devices.txt that attempts to
> > define this new convention that ide seems to now have?
> >
> > af
> >
> > On Mon, 1 May 2000, Mike Castle wrote:
> >
> > > On Mon, May 01, 2000 at 05:12:29AM +0000, Adam Fritzler wrote:
> > > > It just makes sense to me that that first of anything should be numbered
> > > > zero. Second, one. Third, two. Fourth, three. Not have my first
> > > > numbered as two and second labelled as three. It just doesnt make sense
> > > > to me to have two and three if you don't have zero and one first.
> > >
> > > If I have only one serial port on COM2, what should I expect the equivalent
> > > /dev/ttyS? to be?
> > >
> > > mrc
> > > --
> > > Mike Castle Life is like a clock: You can work constantly
> > > dalgoda@ix.netcom.com and be right all the time, or not work at all
> > > www.netcom.com/~dalgoda/ and be right at least twice a day. -- mrc
> > > We are all of us living in the shadow of Manhattan. -- Watchmen
> > >
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > > the body of a message to majordomo@vger.rutgers.edu
> > > Please read the FAQ at http://www.tux.org/lkml/
> > >
> >
> >
> > ---
> > Adam Fritzler
> > { mid@auk.cx }
> > http://www.auk.cx/~mid/
> >
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.rutgers.edu
> > Please read the FAQ at http://www.tux.org/lkml/
> >
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>
---
Adam Fritzler
{ mid@auk.cx }
http://www.auk.cx/~mid/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun May 07 2000 - 21:00:10 EST