The driver initialization messages both look OK:
PRE3:
: eepro100.c:v1.09j+LK1.0 Feb 13, 2000 Linux Kernel Team
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
: eth0: Intel PCI EtherExpress Pro100 at 0xc4825000, 00:A0:C9:42:C8:9B,
IRQ 10.
: Board assembly 667280-003, Physical connectors present: RJ45
: Primary interface chip i82555 PHY #1.
: General self-test: passed.
: Serial sub-system self-test: passed.
: Internal registers self-test: passed.
: ROM checksum self-test: passed (0x49caa8d6).
: Receiver lock-up workaround activated.
PRE6:
: eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
: eepro100.c: $Revision: 1.29 $ 2000/03/30 Modified by Andrey V.
Savochkin <saw@saw.sw.com.sg> and others
: eth0: Intel Corporation 82557 [Ethernet Pro 100], 00:A0:C9:42:C8:9B,
IRQ 10.
: Board assembly 667280-003, Physical connectors present: RJ45
: Primary interface chip i82555 PHY #1.
: General self-test: passed.
: Serial sub-system self-test: passed.
: Internal registers self-test: passed.
: ROM checksum self-test: passed (0x49caa8d6).
: Receiver lock-up workaround activated
eepro100 module from pre3 works just fine with pre6 kernel.
Actual card is 82557.
Art.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Apr 30 2000 - 21:00:18 EST