Andrew Morton wrote:
>
> Gentlemen,
>
> thanks for the feedback on this driver. I have a set of patches
> against 2.3.99-pre6-6 and against pre6-7 which should fix the 'tx
> timeout' problem you observed.
>
Ok, I just tried 2.3.99-pre6, and it doesn't work for me.
The specs:
3c575-TX, PN 16-0045-000 REV:A
Laptop: Sony VAIO 505tx
What I get:
No transmits of any frames. Sees incoming frames.
Works fine with 2.3.99-pre2.
I've attached the dmesg output.
Ideas?
-- ------------------------+-------------------------------------------------- Thomas Davis | PDSF Project Leader tadavis@lbl.gov | (510) 486-4524 | "Only a petabyte of data this year?"
Linux version 2.3.99-pre6 (root@localhost.localdomain) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #11 Thu Apr 27 11:47:33 PDT 2000 e820: 0009f800 @ 00000000 (usable) e820: 00000800 @ 0009f800 (reserved) e820: 00016800 @ 000e9800 (reserved) e820: 03ef0000 @ 00100000 (usable) e820: 0000fc00 @ 03ff0000 (ACPI data) e820: 00000400 @ 03fffc00 (ACPI NVS) e820: 00016800 @ fffe9800 (reserved) On node 0 totalpages: 16368 zone(0): 4096 pages. zone(1): 12272 pages. zone(2): 0 pages. Initializing CPU#0 Detected 298427514 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 594.74 BogoMIPS Memory: 62648k/65472k available (876k kernel code, 2436k reserved, 63k data, 156k init, 0k highmem) VFS: DCACHE hash table configured to 8192 entries Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) VFS: INODE hash table configured to 4096 entries CPU: Intel Mobile Pentium MMX stepping 02 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Intel Pentium with F0 0F bug - workaround enabled. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfda04, last bus=0 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/122e] at 00:07.0 PCI: Guessed IRQ 9 for device 00:0a.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.3 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) Initializing RT netlink socket Starting kswapd v1.6 pty: 256 Unix98 ptys configured Uniform Multi-Platform E-IDE driver Revision: 6.30 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfcd8-0xfcdf, BIOS settings: hdc:pio, hdd:pio hda: TOSHIBA MK6412MAT, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: 12685680 sectors (6495 MB), CHS=839/240/63, UDMA(33) Partition check: hda: hda1 hda2 < hda5 > hda4 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 156k freed Adding Swap: 136040k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub Linux PCMCIA Card Services 3.1.11 kernel build: 2.3.99-pre6 #10 Thu Apr 27 11:16:53 PDT 2000 options: [pci] [cardbus] [pm] ds: no socket drivers loaded! Adding cardbus controller 0: Ricoh Co Ltd RL5c475 Yenta IRQ list 0c98, PCI irq9 Socket status: 30000a20 cs: IO port probe 0x1000-0x17ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x140-0x147 0x170-0x177 0x220-0x22f 0x2f8-0x2ff 0x320-0x327 0x370-0x37f 0x388-0x38f 0x3e8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: cb_alloc(bus 1): vendor 0x10b7, device 0x5057 PCI: Enabling device 01:00.0 (0000 -> 0003) PCI: Assigned IRQ 9 for device 01:00.0 PCI: The same IRQ used for device 00:0a.0 cs: cb_free(bus 1) Adding cardbus controller 0: Ricoh Co Ltd RL5c475 Yenta IRQ list 0c98, PCI irq9 Socket status: 30000826 cs: IO port probe 0x1000-0x17ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x140-0x147 0x170-0x177 0x220-0x22f 0x2f8-0x2ff 0x320-0x327 0x370-0x37f 0x388-0x38f 0x3e8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: cb_alloc(bus 1): vendor 0x10b7, device 0x5057 PCI: Enabling device 01:00.0 (0000 -> 0003) PCI: Found IRQ 9 for device 01:00.0 PCI: The same IRQ used for device 00:0a.0 cs: cb_free(bus 1) cs: cb_alloc(bus 1): vendor 0x10b7, device 0x5057 PCI: Enabling device 01:00.0 (0000 -> 0003) PCI: Found IRQ 9 for device 01:00.0 PCI: The same IRQ used for device 00:0a.0 3c59x.c:v0.99L+LK1.1.2+AKPM 24 Apr 2000 Donald Becker and others http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html eth0: 3Com PCI 3c575 Boomerang CardBus at 0x1000, PCI: Increasing latency timer of device 01:00.0 to 64 00:60:08:01:d7:4e, IRQ 9 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface. MII transceiver found at address 0, status 7809. Enabling bus-master transmits and whole-frame receives. eth0: first avaialble mdeia type: MII eth0: first avaialble mdeia type: MII
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Apr 30 2000 - 21:00:13 EST