Hello,
We did the following for using proxy-arp in a machine
1. Set /proc/sys/net/ipv4/conf/*/proxy_arp to 1 ( using echo )
2. published arp entry for w.x.y.z ( using the command
arp -H ether -i eth0 -Ds w.x.y.z eth0 pub
The system responds for arp request for this address. But also responds
for other unpublished addresses
We tried with RedHat6.0 system on a pentium with two NE2000 compatible
cards. We tried a newer kernel ( 2.2.14 ) when we had this problem but it
still remains. Any help will be appreciated.
Thanks,
A.Ramasamy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Apr 23 2000 - 21:00:15 EST