Re: PCMCIA init failure on 2.3.99

From: David Hinds (dhinds@valinux.com)
Date: Thu Apr 13 2000 - 13:06:27 EST


On Tue, Apr 11, 2000 at 02:23:58PM -0700, Guy Hutchison wrote:
>
> However, inserting either card provides the helpful prompt
> "RequestIRQ: Resource in use". I know I've seen this message
> before, but don't remember what I did about it. :(

This message probably means that the socket driver's interrupt probe
failed to find any available interrupts, and the kernel also was not
able to figure out the PCI interrupt routing for the CardBus bridge.
For the PCI interrupt issue, forward kernel messages to Martin Mares,
mj@ucw.cz. It might be worth also sending the messages from my
drivers on a 2.2.* kernel if they behave differently. The interrupt
probe problem should be forwarded to Linus, he wrote that driver.

-- Dave

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Apr 15 2000 - 21:00:22 EST