By adding
append = "ppa=0x378 parport=0x378,7,3 opl3sa2=0x370,5,1,0,0x530,0x330 "
into my lilo.conf sound will now work just after a reboot. But after
a suspend/resume cycle I can't get any sound out of the computer.
Gom seems to think that there are still mixer controls available, but
they don't make any difference.
The computer is a Toshiba Satellite Pro 445CDX.
The only sound related lines I find in my log files are:
Mar 24 11:44:38 krypton kernel: ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
Mar 24 11:44:38 krypton kernel: Found OPL3-SA3 (YMF715)
Mar 24 11:44:38 krypton kernel: <MS Sound System (CS4231)> at 0x534 irq 5 dma 1,0
Mar 24 11:44:38 krypton kernel: <MPU-401 0.0 Midi interface #1> at 0x330 irq 5 dma 1,0
The sound section of my .config is:
#
# Sound
#
CONFIG_SOUND=y
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=y
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_PAS_JOYSTICK is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SOFTOSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_OPL3SA1 is not set
CONFIG_SOUND_OPL3SA2=y
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
Thanks,
davec
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Mar 31 2000 - 21:00:26 EST