I've been having some intermittent problems with a brand new plextor IDE
CD-RW drive under linux. I haven't had any problems reading or writing to
the drive under winDOS 95, nor have I had problems writing to the drive
using cdrecord, but I've had tons of problems reading from the drive (e.g.
mounting a CD). I'm accessing the drive via ide-scsi emulation.
I'm running 2.2.14 and have tried the latest IDE patch (ide20000124) to
see if that would help, but I still have problems.
Here's what happens when I try to mount a CD:
[root@manteador ~]$ mount -t iso9660 -o ro /dev/scd0 /mnt/cdrom
mount: wrong fs type, bad option, bad superblock on /dev/scd0,
or too many mounted file systems
[root@manteador ~]$
Relevant errors from 'dmesg' caused by the mount attempt:
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: PLEXTOR Model: CD-R PX-W8432T Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CDROM driver Revision: 2.56
VFS: Disk change detected on device sr(11,0)
ide-scsi: The scsi wants to send us more data than expected - discarding
data
ide-scsi: The scsi wants to send us more data than expected - discarding
data
ide-scsi: The scsi wants to send us more data than expected - discarding
data
ide-scsi: The scsi wants to send us more data than expected - discarding
data
<these errors repeat a total of 84 times>
Unable to identify CD-ROM format.
/etc/conf.modules relevant contents:
# kernel 2.2.x ATAPI SCSI emulation
options ide-cd ignore=hdc # if /dev/hdc is your CD-writer
post-install sr_mod /sbin/modprobe ide-scsi # auto probe module
alias scd0 sr_mod # load sr_mod upon access of scd0
alias scsi_hostadaptor ide-scsi # SCSI host adaptor emulation
I need some assistance in determining if this is a hardware problem or a
linux problem so that I can RMA the drive or linux ;-)
If I try to mount the CD using straight ATAPI mode it works just fine
(i.e. /dev/hdc without scsi modules).
Now oddly that I've re-enabled the ide-scsi modules, I can mount cdroms
with no problem. This doesn't always work.
Perhaps I should enable verbose scsi error reporting... I'll wait to hear
back from you fine folks first. Please CC me on replies since I'm not
subscribed. Tx!
-core
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Mar 23 2000 - 21:00:35 EST