Hi Richard, Jay, et. al.,
I had a few minutes just now to try out the latest 2.3 series on our
4GB ES40. We're much closer than we used to be - the first SCSI adapter
now probes correctly, finding all attached disks. The second however,
still winds up with command timeouts ad infinitum, ad nauseum (thank God
for the RMC - I'd have to walk a mile if I couldn't reboot the thing
from my cube! ;) I've attached the relevant parts of the boot log
below. Please let me know if there is anything we can do over here to
help - the system will be in and out of testing, but I'm the one on the
keyboard, so... ;) Thanks!
- Pete
P00>>>b dka200 -fi vmlinux.99pre2.gz -fl "root=43e1 console=ttyS0"
(boot dka200.2.0.1.1 -file vmlinux.99pre2.gz -flags root=43e1
console=ttyS0)
block 0 of dka200.2.0.1.1 is a valid boot block
reading 152 blocks from dka200.2.0.1.1
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 13000
initializing HWRPB at 2000
initializing page table at 3ffb4000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
aboot: Linux/Alpha SRM bootloader version 0.5
aboot: switching to OSF/1 PALcode version 1.62
aboot: valid disklabel found: 5 partitions.
aboot: booted_dev=`scsi 1 1 0 2 200 0 0', guessing boot_device=`scd0'
aboot: loading compressed vmlinux.99pre2.gz...
aboot: ok, now starting the kernel...
Linux version 2.3.99-pre2 (frival@schooner.zk3.dec.com) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #2 SMP Fri Mar 20
14:39:34 EST 2048
Booting on Tsunami variation Clipper using machine vector Clipper from
SRM
Command line: root=43e1 console=ttyS0 bootdevice=scd0
bootfile=vmlinux.99pre2.gz
memcluster 0, usage 1, start 0, end 256
memcluster 1, usage 0, start 256, end 131033
memcluster 2, usage 1, start 131033, end 131072
memcluster 3, usage 0, start 131072, end 524282
memcluster 4, usage 1, start 524282, end 524288
freeing pages 793:131033
freeing pages 131072:524282
SMP: 4 CPUs probed -- cpu_present_mask = f
On node 0 totalpages: 524288
zone(0): 524288 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Console: colour VGA+ 80x25
Calibrating delay loop... 1325.40 BogoMIPS
Memory: 4097040k/4194256k available (1492k kernel code, 94856k reserved,
431k data, 232k init)
Buffer-cache hash table entries: 262144 (order: 8, 2097152 bytes)
Page-cache hash table entries: 524288 (order: 9, 4194304 bytes)
POSIX conformance testing by UNIFIX
SMP starting up secondaries.
recv_secondary_console_msg: on 0 message is 'P01>>>START P01>>>'
Calibrating delay loop... 1325.40 BogoMIPS
recv_secondary_console_msg: on 0 message is 'P02>>>START P02>>>'
Calibrating delay loop... 1325.40 BogoMIPS
recv_secondary_console_msg: on 0 message is 'P03>>>START P03>>>'
Calibrating delay loop... 1325.40 BogoMIPS
SMP: Total of 4 processors activated (5301.60 BogoMIPS).
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 32768 buckets, 512Kbytes
TCP: Hash tables configured (established 262144 bind 43690)
Starting kswapd v1.6
Serial driver version 4.92 (2000-1-27) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Floppy drive(s): fd0 is 2.88M
FDC 0 is a post-1991 82077
qlogicisp : new isp1020 revision ID (5)
qlogicisp : new isp1020 revision ID (5)
qlogicisp : new isp1020 revision ID (5)
qlogicisp : new isp1020 revision ID (5)
qlogicisp : new isp1020 revision ID (5)
qlogicisp : new isp1020 revision ID (5)
sym53c8xx: at PCI bus 1, device 1, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c895 detected with Symbios NVRAM
sym53c895-0: rev 0x2 on pci bus 1 device 1 function 0 irq 40
sym53c895-0: NCR clock is 40037KHz
sym53c895-0: Symbios format NVRAM, ID 7, Fast-40, Parity Checking
sym53c895-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
00/00/00/00/00/00
sym53c895-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
07/4e/80/00/08/24
sym53c895-0: on-chip RAM at 0x201001000
sym53c895-0: Delay (GEN=11): 253 msec, 35131 KHz
sym53c895-0: Delay (GEN=11): 276 msec, 32204 KHz
sym53c895-0: Delay (GEN=11): 276 msec, 32204 KHz
sym53c895-0: resetting, command processing suspended for 2 seconds
sym53c895-0: restart (scsi reset).
sym53c895-0: enabling clock multiplier
sym53c895-0: Downloading SCSI SCRIPTS.
scsi0 : QLogic ISP1020 SCSI on PCI bus 00 device 08 irq 24 I/O base
0x8000
scsi1 : QLogic ISP1020 SCSI on PCI bus 00 device 10 irq 28 I/O base
0x8800
scsi2 : QLogic ISP1020 SCSI on PCI bus 00 device 18 irq 32 I/O base
0x9000
scsi3 : QLogic ISP1020 SCSI on PCI bus 01 device 10 irq 44 I/O base
0x200000800
scsi4 : QLogic ISP1020 SCSI on PCI bus 01 device 20 irq 52 I/O base
0x200001000
scsi5 : QLogic ISP1020 SCSI on PCI bus 01 device 28 irq 56 I/O base
0x200001800
scsi6 : sym53c8xx - version 1.5k
scsi : 7 hosts.
Vendor: DEC Model: RZ29B (C) DEC Rev: 0014
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: DEC Model: RZ29B (C) DEC Rev: 0014
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: DEC Model: RZ29B (C) DEC Rev: 0014
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdc at scsi0, channel 0, id 2, lun 0
Vendor: DEC Model: RZ29B (C) DEC Rev: 0014
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdd at scsi0, channel 0, id 3, lun 0
Vendor: DEC Model: RZ29B (C) DEC Rev: 0014
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sde at scsi0, channel 0, id 4, lun 0
sym53c895-0: command processing resumed
Vendor: DEC Model: RZ29B (C) DEC Rev: 0014
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdf at scsi0, channel 0, id 5, lun 0
Vendor: DEC Model: RZ29B (C) DEC Rev: 0014
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdg at scsi0, channel 0, id 6, lun 0
scsi : aborting command due to timeout : pid 0, scsi1, channel 0, id 0,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 0, scsi1, channel 0, id 0,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 0, scsi1, channel 0, id 0,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 0, scsi1, channel 0, id 0,
lun 0 Test Unit Ready 00 00 00 00 00
RMC> reset
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Mar 23 2000 - 21:00:29 EST