Re: AIC7XXX SCSI driver not working right, Baracuda

• Next message: Seth Aaron Nickell: "spinlock.h ... no compile w/o SMP turned on"
• Previous message: James Sutherland: "Re: Overcommitable memory??"
• In reply to: Linda Walsh: "Re: AIC7XXX SCSI driver not working right, Baracuda"
• Maybe reply: Linda Walsh: "Re: AIC7XXX SCSI driver not working right, Baracuda"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Thu, 16 Mar 2000, Linda Walsh wrote:

> In 2.2.13, the AIC7xxx driver rev was at 5.1.20. In 2.2.14 it went
> to 5.1.21. Current rev is at 5.1.28. In 5.1.21, many changes
> went in that affected the 78xx and 2920C series. While it fixed
> problems for some drives, it broke compatibility with alot of
> other drives.
>
> Purely as a debug datapoint, you might wanna grab the 2.2.13 sources
> and grab all the aicxxx files in the <kernel root>/drivers/scsi
> directory (some files and a directory). Replace the drivers in
> 2.2.14 and/or the more current 2.3 series and see if your problem
> goes away.

I solved my problem. This been cable not software problem.
Now I run Linux 2.2.14 and all works fine.

Regards
Wiget

-- 
wiget@t17.ds.pwr.wroc.pl		DS T17 Bofh
PGP key: http://www.t17.ds.pwr.wroc.pl/~wiget/pgp.key
1024D/D3D4CF84 E4D3 6787 284C 57F0 3C1F  ADFD A92A 3F2E D3D4 CF84
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

• Next message: Seth Aaron Nickell: "spinlock.h ... no compile w/o SMP turned on"
• Previous message: James Sutherland: "Re: Overcommitable memory??"
• In reply to: Linda Walsh: "Re: AIC7XXX SCSI driver not working right, Baracuda"
• Maybe reply: Linda Walsh: "Re: AIC7XXX SCSI driver not working right, Baracuda"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Thu Mar 23 2000 - 21:00:19 EST