I am having a strange issue with the tulip_cb driver under 2.3.51. I
suspect that it is a problem with the tulip_cb driver 'cause my ray_cs
driver/card combo function as they should.
The problem is that the stab file is wrong. Here is the
/var/state/pcmcia/stab file from 2.3.51:
Socket 0: empty
Socket 1: UMAX Technologies UMAX250 Fast Ethernet
1 network tulip_cb 0 tulip_cb
>From 2.2.14 I get:
Socket 0: empty
Socket 1: UMAX Technologies UMAX250 Fast Ethernet
1 network tulip_cb 0 eth0
This causes cardmgr to try and run "./network start tulip_cb" not
"./network start eth0" as it should.
Erik.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Mar 15 2000 - 21:00:25 EST