1. Kernel 2.3.51 Doesn't Boot On PowerBook G3
2. The kernel dies on initialization following checks of the hda bus. The
last output is for scsi detection, and then the error message at the end
of the message ensues. I have USB and Appletalk compiled (USB has modules,
Appletalk would only compile in the actual kernel), as well as frame
buffer support, which appears to work (I pass the kernel command line
arguments about the video buffer through BootX).
3. kernel ppc powerbook boot
4. 2.3.51 (self compiled with above options)
5. Here is the death message:
Machine Check in Kernel Mode
Caused by (from SRRI=49030): Transfer error ack signal
NIP: C00DB1D4 XER:20000000 LR: C00DEFDC REGS: C06fbd60 TRAP:0200
MSR: 0049030 EE:1 PR:0 FP:0 ME:1 IR/DR:11
TASK= c06fa000[1] 'swapper' Last Syscall: 120
Last Math 00000000 Last Altivec 00000000
GPR00: FE00039C C06FBE10 C06FA000 00000390 0000039E 00000011 C06FBE48
00000005
GPR08: C0250000 FE000000 0000039C 000000FF 00000390 003400A4 0D2B4476
0E25AEB0
GPR16: 42000048 FFD12F10 0D2B5EB0 00000001 00000000 0E25B050 0E25B054
0E25AED0
GPR24: 00000000 0F0B4D84 C0185010 C0244A1C 00000000 00418510 C06FBE48
0000D01C
Call Backtrace:
C001E854 C00DEF50 C02698BC C02699D4 C0277CAC C0264764
C026320C C0256740 C02567DC C0003FA4 C000950C
7. Powerbook G3 / 1999. PPC 750@400 mhz. Booting on a 3.8G partition of an
IDE drive on hda9. Connected to speakers, power supply, and 10BaseT
network via the standard BMAC ethernet card.
I hope this is enough to give you some clue. If you want me to do a
specific test, please don't hesitate to ask.
Many thanks,
Christopher Tuttle, KD7ECQ
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Mar 15 2000 - 21:00:25 EST