Hi,
First, note that I've never had a failure before to mount
my root filesystem. I've been building development kernels
a long time and I changed no LILO options between 2.3.51 and
2.3.52-1. It may be that I've hit a bug in the configuration
files. I am appending my .config file (I've trimmed out the
info for options that aren't enabled).
I get the following boot messages before my machine locks up
booting 2.3.52-1:
Adding cardbus controller 0: Texas Instruments PCI1131
PCI: Enabling device 00:04.0 (0000 -> 0002)
PCI: No IRQ known for interrupt pin A of device 00:04.0. Please
try using pci=biosirq
Yenta IRQ list 0c98, PCI irq0
Socket status: 30000068
Adding cardbus controller 0: Texas Instruments PCI1131
PCI: Enabling device 00:04.1 (0000 -> 0002)
PCI: No IRQ known for interrupt pin B of device 00:04.1. Please
try using pci=biosirq
Yenta IRQ list 0c98, PCI irq0
Socket status: 30000059
request_module[block-major-3]: Root fs not mounted.
VFS: Cannot open root device "305" or 03:05
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 03:05
kmem_grow: Called nonatomically from int - size-128
-----------
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
CONFIG_UID16=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Processor type and features
#
CONFIG_M686=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_KMOD=y
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
CONFIG_APM=y
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_ALLOW_INTS=y
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_1284=y
#
# Plug and Play configuration
#
CONFIG_PNP=m
CONFIG_ISAPNP=m
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=y
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK=y
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=y
CONFIG_INET=y
#
# (it is safe to leave these untouched)
#
CONFIG_SKB_LARGE=y
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=m
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDESCSI=m
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_IDEDMA_PCI_EXPERIMENTAL=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IDE_MODES=y
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
CONFIG_DUMMY=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
#
# Ethernet (1000 Mbit)
#
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C575=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=m
CONFIG_SERIAL_EXTENDED=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=125
CONFIG_PRINTER=m
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=m
CONFIG_PSMOUSE=y
#
# Ftape, the floppy tape device driver
#
CONFIG_PCMCIA_SERIAL=m
#
# PCMCIA character device support
#
CONFIG_PCMCIA_SERIAL_CS=m
CONFIG_PCMCIA_SERIAL_CB=m
#
# USB support
#
CONFIG_USB=m
#
# USB Controllers
#
CONFIG_USB_UHCI=m
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
#
# USB Devices
#
CONFIG_USB_SCANNER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_RIO500=m
#
# USB HID
#
CONFIG_INPUT_EVDEV=m
#
# File systems
#
CONFIG_AUTOFS_FS=y
CONFIG_FAT_FS=y
CONFIG_VFAT_FS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_EXT2_FS=y
#
# Partition Types
#
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_ISO8859_15=m
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
#
# Sound
#
CONFIG_SOUND=y
CONFIG_SOUND_OSS=y
CONFIG_SOUND_CS4232=y
CONFIG_SOUND_YM3812=y
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Mar 15 2000 - 21:00:23 EST