With the most recent kernels (I think 2.3.47-2.3.50), I keep getting
an infinite loop in the SCSI initialization phase. lspci returns this
for the controller:
01:04.0 SCSI storage controller: Symbios Logic Inc. (formerly
NCR) 53c895 (rev 02)
My system is an ES40 (Quad 500MHz 21264 Alphas, tsunami chipset).
Here is the error I'm getting while booting up:
sym53c8xx_reset: pid=0 reset_flags=2 serial_number=2 serial_number_at_timeout=2
sym53c895-0: resetting, command processing suspended for 2 seconds
sym53c895-0: command processing resumed
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
This just keeps repeating, I assume forever but I only let it go about
10 times. Any ideas on what is wrong with this? The relevent config
file stuff looks like this:
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
CONFIG_ST_EXTRA_DEVS=2
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=64
CONFIG_SCSI_NCR53C8XX_SYNC=40
CONFIG_SCSI_NCR53C8XX_PQS_PDS=y
BAPper
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Mar 15 2000 - 21:00:14 EST