Den 29-Feb-00 23:14:22 skrev Georgios Kossionis fĝlgende om "Problem: Not configure hde on HPT366 (on ABIT BP6).":
[cut]
> So I used the first two values in each set and entered them in the lilo
> prompt as follows
> Lilo: ide2=0xb000,0xb402 ide3=0xbc000,0xc002
^
There is one digit too many there. I think the ninth port has to end in
6 on any reasonable hardware design you can imagine, so try
ide2=0xb000,0xb406 ide3=0xbc00,0xc006
instead. If that fails too, try setting it to 0x0 (or omit it altogether) -
the driver can do without the ninth port, AFAIK.
Regards,
/ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻTŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ\
| Rask Ingemann Lambertsen | E-mail: mailto:rask@kampsax.dtu.dk |
| Please do NOT Cc: to me or the | WWW: http://www.gbar.dtu.dk/~c948374/ |
| mailing list. I am on the list.| "ThrustMe" on XPilot, ARCnet and IRC |
| Never underestimate the bandwidth of a CD-ROM flying through the lab. |
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Mar 07 2000 - 21:00:08 EST