Ashok Raj writes:
> Linux kernel names the scsi drives sda, sdb .... so in case you switch
> slots, or move across to a different controller
> then its possible you can have very bad effects. Worst case is removing a
> drive and the drive device files dont have a persistant assiciation with the
> location, or do we have a magic superblock what the configured name was.
>
> is there a solution to Linux for this? i was looking at raid, but the config
> file says /dev/sda etc, and it says it does do the superblock magic to avoid
> this. In a SAN its more important as a remote scsi disk may be detectect in
> a different order.
If you are using ext2 filesystems, you can use the ext2 filesystem "label"
instead of the device in /etc/fstab, so you don't get burned by drive name
or address changes. See mount(8) and fstab(5) for more info (a newer version
of mount is required to support labels).
IMHO, the Solaris/devfs method of specifying drives by
controller/drive/partition is not much better than the current system,
as you still have problems if the SCSI ID is changed, or if you add a
new controller and the controller numbering changes.
Cheers, Andreas
-- Andreas Dilger \ "If a man ate a pound of pasta and a pound of antipasto, \ would they cancel out, leaving him still hungry?" http://www-mddsp.enel.ucalgary.ca/People/adilger/ -- Dogbert- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Feb 23 2000 - 21:00:17 EST