On Sat, Jan 29, 2000 at 11:40:45PM -0800, Andre Hedrick wrote:
>
> Drat!!!!!!!!!! The other WDC rule........
>
> Fastest drive must be master..........do not ask why.
> Both of these will report ATA-66.
>
I am also seeing similar problems with 2.3.41, but not 2.3.40. But
here, it is the hdb interrupt that is missed.
Uniform Multi-Platform E-IDE driver Revision: 6.30
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
hda: QUANTUM FIREBALL1080A, ATA DISK drive
hdb: Maxtor 92720U8, ATA DISK drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: QUANTUM FIREBALL1080A, 1039MB w/83kB Cache, CHS=528/64/63
hdb: Maxtor 92720U8, 25965MB w/2048kB Cache, CHS=3310/255/63
>
> If you reverse the drives, I expect the missed interrupt goes away.
> If it does not let me know.
>
> Also you have not enable PIIX tuning.
> This will force the drives to their correct limits with respect to the
> host adapter.
I will also try both of these.
By the way, I initially considered that my problem might be an interrupt
controller problem, since in one crash event, my ethernet card, a 3com
vortex, got stuck in a flood of interrupts.
dave...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jan 31 2000 - 21:00:25 EST