Reboot problems - Was: Re: 2.3.41-4 / hda: lost interrupt

From: Anton Altaparmakov (aia21@cam.ac.uk)
Date: Sat Jan 29 2000 - 21:17:21 EST


At 00:52 30/01/00 , Maciej Zeczykowski wrote:
[snip]
>I have a Satellite 2590 CDT (Toshiba) with no extra harware
>running Red Hat 6.1 (kernel 2.2.12 I believe), all works ok, except
>when dual booted to DOS (from Win98) and then ctrl+alt+deled (warm
>reboot), after this lilo boots and starts loading linux, after a timeout
>of course - and this is when I start getting lost interrupts.
>Suspending the machine does not work. The only solution to this problem
>is to shutdown linux, turn of the notebook. And reboot from an off state.
>All then works normally. Any ideas?

On my notebook I run into problems when rebooting from Win9x to Linux but
not from Win9x to Win9x, Linux to Linux or Linux to Win9x. - For example if
I run X after a Win9x to Linux reboot all colors are scrambled. - I noticed
this since I upgraded to 2.2.x kernels on the notebook.
If I power down between OS changes, always no problems, kernel with problem
last time I tried it was 2.2.12.
I don't get the lost interrupts though but I think we are having the same
kind of problem which I have always attributed to win9x programming the
hardware which then doesn't get reset during a soft reboot and linux on the
other hand making assumptions about the state of the hardware during
boot-up, which I don't feel is a linux problem but rather a broken BIOS
problem (not reinitializing hardware properly during soft reboot). - Feel
free to correct me if I am wrong...
I would therefore suggest to power-cycle your notebook during an OS switch
and as you say yourself you have no problems. (-:
If anyone has better suggestions/solutions I would love to hear them.

Anton

FYI: Notebook is Rock Computers, Model: Mentor 620, 48MB, Intel Pentium MMX
200, C&T65550 2MB gfx card, OPTi chipset, output of lspci:
00:00.0 Host bridge: OPTi Inc. 82C557 [Viper-M] (rev 14)
00:01.0 ISA bridge: OPTi Inc. 82C558 [Viper-M ISA+IDE] (rev 02)
00:06.0 VGA compatible controller: Chips and Technologies 65550 (rev c6)
00:07.0 CardBus bridge: Texas Instruments PCI1130 (rev 04)
00:07.1 CardBus bridge: Texas Instruments PCI1130 (rev 04)
00:14.0 IDE interface: OPTi Inc. 82C621 (rev 12)

--

"Education is what remains after one has forgotten everything he learned in school." - Albert Einstein

-- Anton Altaparmakov <AntonA at bigfoot.com> (replace at with @) ICQ: 8561279 WWW: http://tmd.ipfox.com/

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Jan 31 2000 - 21:00:24 EST