> Can you send me the pci data from /proc/pci for your megaraid. I may have
Bus 0, device 7, function 1:
Unknown class: Intel OEM MegaRAID Controller (rev 3).
Medium devsel. Fast back-to-back capable. BIST capable. IRQ 9.
Master Capable. Latency=32.
Prefetchable 32 bit memory at 0xf0000000 [0xf0000008].
[Entire list]
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 440BX - 82443BX Host (no AGP) (rev 2).
Medium devsel. Master Capable. Latency=64.
Prefetchable 32 bit memory at 0x0 [0x8].
Bus 0, device 4, function 0:
ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 4, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
I/O at 0xfcd0 [0xfcd1].
Bus 0, device 4, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
I/O at 0xfce0 [0xfce1].
Bus 0, device 4, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
Medium devsel. Fast back-to-back capable.
Bus 0, device 7, function 0:
PCI bridge: Intel i960 (rev 3).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=56. Min Gnt=7.Max Lat=2.
Bus 0, device 7, function 1:
Unknown class: Intel OEM MegaRAID Controller (rev 3).
Medium devsel. Fast back-to-back capable. BIST capable. IRQ 9. Master Capable. Latency=32.
Prefetchable 32 bit memory at 0xf0000000 [0xf0000008].
Bus 0, device 8, function 0:
PCI bridge: DEC DC21152 (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=57. Min Gnt=7.Max Lat=6.
Bus 0, device 11, function 0:
System peripheral: Hewlett Packard Unknown device (rev 160).
Vendor id=103c. Device id=10c1.
Slow devsel.
Non-prefetchable 32 bit memory at 0xfedf8000 [0xfedf8000].
Bus 0, device 13, function 0:
VGA compatible controller: Cirrus Logic GD 5446 (rev 69).
Medium devsel.
Prefetchable 32 bit memory at 0xfc000000 [0xfc000008].
Non-prefetchable 32 bit memory at 0xfedf7000 [0xfedf7000].
Bus 1, device 7, function 0:
SCSI storage controller: NCR 53c895 (rev 1).
Medium devsel. IRQ 10. Master Capable. Latency=247. Min Gnt=30.Max Lat=64.
I/O at 0xe800 [0xe801].
Non-prefetchable 32 bit memory at 0xfebff800 [0xfebff800].
Non-prefetchable 32 bit memory at 0xfebfe000 [0xfebfe000].
Bus 2, device 2, function 0:
Ethernet controller: 3Com 3C905B 100bTX (rev 100).
Medium devsel. IRQ 11. Master Capable. Latency=80. Min Gnt=10.Max Lat=10.
I/O at 0xdc00 [0xdc01].
Non-prefetchable 32 bit memory at 0xfeaff800 [0xfeaff800].
-- Christopher Barton Network Analyst, AITS (217) 333-0320On Wed, 19 Jan 2000, Alan Cox wrote:
> > > o Fix hang on boot with I2O configured megaraid (me) > > When I boot 2.2.15pre3, I get the message about this. I'm using an HP > > NetRAID adapter, and I can't seem to figure out how to reconfigure the > > card's BIOS as instructed. > > Can you send me the pci data from /proc/pci for your megaraid. I may have > managed to get the test logic a bit wrong when I backported it from 2.3 to > 2.2 > > > Is this modification permanent or temporary? I've got a whole room of > > machines that won't boot pre3. :( > > Then it needs fixing. >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jan 23 2000 - 21:00:19 EST